VACleaseLT30Y1.5P3 30 micron red Release film 1.5mt wide (5m or less will be folded, call us if this is a problem)
VACleaseLT30Y1.5P3 Release Film is a highly flexible, perforated, polypropylene based release film. Suitable for use with epoxy prepreg up to 150ºC .
VACleaseLT30Y1.5P3 is an inexpensive release film, mainly used during the processing of flat or simple curvature components
Exhibits excellent release characteristics from all commonly used resin systems
Available coloured yellow for ease of identification on the cured laminate
PHYSICAL PROPERTIES
Maximum Use Temperature Up to 150ºC
Density 0.89g/cm3
Elongation at break >500%
Colour yellow
Packaging: 5m and under will be sent folded: 6m and over will be sent rolled. If you need a small amount rolled, please contact us.
Why use porous release film ?
Porous release films act much like woven peel-ply , however, the finished surface will be much smoother. Excess epoxy will bleed off through the perforations and be soaked into the breather fabric.
