Carbon Fibre Tube 22mm - 19mm
All our carbon tubes in this section are roll wrapped using high grade carbon pre-preg, in a 2 x 2 twill weave pattern.
Pre-preg is rolled onto a mandrel and placed in an oven to cure, resulting in a tube that is stiff and light.
These tubes can be used for robotics, UAV construction, leisure applications and anywhere that requires low weight but high stiffness.
Tubes can be cut and shaped with basic hand tools, such as a fine tooth hacksaw.
All tubes will be shipped in postal tubes to prevent crushing during transit.
OD 22mm
ID 19mm
Wall Thickness 1.5mm
Stiffness I x E (KNM2) 0.54
Weight (KG/M) 0.14
