Infuply2 is Vi1 mesh bonded onto A2200 release film - perforated release film combined with knitted infusion mesh. This new process allows the material to be cut into different widths and complex forms. The adhesive is spread over the entire surface. This process offers many possible combinations including drainage flow variables.
Much easier & quicker to apply when compared to applying the products individually
Doesn’t roll up at the edges like normal mesh/film
Because of the film, it can be spray tacked into position more easily
Much easier to tailor to shape
Easier to remove following infusion compared to peel ply
More conformable than current alternatives
Easier to position, one product rather than 2
Less spray adhesive/tape required for fixing consumable products in position
Easy to join, just overlap
1.43m wide
Material: PE
Maximum use temp: 100°C to 120°C
Colour: blue/orange
Weight: 150g/m˛
Packaging: 5m and under will be sent folded: 6m and over will be sent rolled. If you need a small amount rolled, please contact us.
