All sizes include minimum 2% MEKP Catalyst.
Crystic® Flowcoat GT-600 is a high performance isophthalic Flowcoat. It is pre-accelerated and formulated for brush application.
Crystic® Flowcoat GT-600 has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.
Wax is added for a tack free surface, commonly used on Boats, Roofs, Ponds and other outside surfaces.
GelTint offers the latest in pigment and gelcoat technology producing a high quality product for ease of use, finish and longevity.
Please note that this is a Brush Flowcoat only and is designed to be applied liberally with a brush to allow the correct content of wax within the layer. Please call us for more information on application if you are unsure.
Colour shown above is approximate for reference - Please do not use website images to colour match as colours will vary across different monitors/printers etc. Please refer to a RAL colour chart for more accurate matching.
Ensure the Flowcoat has attained temperature of 15°C - 25°C before use, and Catalyst is added at 2% by volume.
Some considerations:
Flowcoat should never be compared to that of a marine paint type finish, it is used generally on lower cosmetic areas such as engine bays, lockers, inside of boat hulls (some find it acceptable on the outside if it’s a lower value project), please see our application video in the Video Guides tab.
