The red waffle pad is a slightly softer pad for very fine finishing with less risk of burning at high speed
Can be used on Paint and Headlight Surfaces
For use with a Polisher, Drill (1200-1600 rpm) or by Hand
By Polisher
1. Disconnect power of the polisher, and install 3" Back Plate (no. RA-BP314) with adapter onto the polisher.
2. Adhering the waffle pad on 3" Back Plate. Apply suitable amount of compound or wax onto the foam pad.
3. Before switching on the polishing machine, spread the compound or wax evenly on the surface.
By Drill (1200-1600 rpm)
1. Disconnect power of the drill, and install 3" Back Plate (no.RA-905) onto the drill.
2. Adhering the waffle pad on 3" Back Plate. Apply suitable amount of compound or wax onto the foam pad.
3. Before switching on the drill, spread the compound or wax evenly on the surface.
CAUTION Do not run the foam pad without rubbing compound or wax: Do not hold the machine in one placing when operating, Be careful around door handles, mirrors, bumpers and adjacent panels, as the edge of back plate and velcro on foam pad may scratch or damage paint surface.
