All sizes include minimum 2% MEKP Catalyst.
Crystic® Flowcoat GT-600 is a high performance isophthalic Flowcoat. It is pre-accelerated and formulated for brush application.
Crystic® Flowcoat GT-600 has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.
Wax is added for a tack free surface, commonly used on Boats, Roofs, Ponds and other outside surfaces.
GelTint offers the latest in pigment and gelcoat technology producing a high quality product for ease of use, finish and longevity.
Please note that this is a Brush Flowcoat only and is designed to be applied liberally with a brush to allow the correct content of wax within the layer. Please call us for more information on application if you are unsure.
Colour shown above is approximate for reference - Please do not use website images to colour match as colours will vary across different monitors/printers etc. Please refer to a RAL colour chart for more accurate matching.
Ensure the Flowcoat has attained temperature of 15°C - 25°C before use, and Catalyst is added at 2% by volume.
Some considerations:
Flowcoat should never be compared to that of a marine paint type finish, it is used generally on lower cosmetic areas such as engine bays, lockers, inside of boat hulls (some find it acceptable on the outside if it’s a lower value project), please see our application video in the Video Guides tab.
An Isophthalic Flowcoat for brush application. It has been carefully formulated to give excellent brushing properties. The thixotropy has been adjusted to minimise sag on inclined and vertical surfaces
