This vacuum pump from British/Australian manufacturer Javac is covered by a 12 month warranty, and will deliver years of reliable service, even in the busiest composites workshop. This pump is ideally suited to just about any composites vacuum process, including vacuum bagging, vacuum resin infusion, vacuum pressing and pre-preg/autoclave use (appropriate additional equipment would be required).
We use these pumps in our workshop for resin infusion work, and have proved to be very reliable.
A 110V conversion cable is available.
This pump is also suited to de-gassing of casting resins and silicones, and features an an oil de-mister to reduce oil spillage.
Model: CC-31
• Pumping Speed: 40 litre/min (1.4 CFM)
• Ultimate Vacuum: 15 micron
• Voltage: 115/220v ~50/60hz
• Motor: 1/4HP
• No. of Stages: 2
• Oil Capacity: 350ml
• Weight: 9.6Kg
• Dimensions (L, W, H): 375mm x 178mm x 330mm
