Everything you need to create a fibreglass mould in one easy kit.
This kit is put together with the amateur in mind, using General Purpose
Resin so that is it is easier to apply than more complicated Tooling
Resins, which require a bit more skill to use. Please read our making
Fibreglass Moulds section for a full detailed application how to guide: Making Moulds
If you require a more advanced system please choose the Crystic RTR 4010 PA Tooling Resin option
where you get a more stable part with Minimal or no shrinkage, this
system requires 5 layers applied together in single layers, a full
detailed instruction guide can be found here Crystic RTR 4010 PA Tooling Resin Video
500ml blue gloss PVA Release Agent
1 tin Meguiars M-08 Mirror Glaze wax
1 kg 300g chopped strand matting
6kg 450g chopped strand matting
1 Lt bucket 6mm chopped strands
2.5kg Tooling Gelcoat - green
2.5kg CRESTAMOULD® VE 679PA - TOOLING ( Barrier layer )
15kg 28500PA General Purpose Resin or RTR 4010PA
